Sonic Wave Sensor XB
The OSSI-010-035 Sonic Wave Sensor XB is a water level sensor that combines a rugged, IP67 resistant to water submersion package, Xbee RF Module, low power microprocessor and Anti-aliasing sensing circuit. It will provide months of operation with two industry standard C size alkaline batteries. Sonic Wave Sensor XB has a range of 2.5 meters. See data Sheet 2 Wave Performance for limitations. Laptops and PCs can easily receive the Sonic Wave Sensor XB’s data with any one of several optional Wireless Adaptors. Time stamped data can be used to synchronize up to 8 Sonic Wave Sensor XBs or Wave Staff XBs. A new, easy to use, PC Staff Product Interface Program is available to down load from our web site to configure, display, analyze and store the sensor data.
Core Features
Product Application
Determine the product's adherence to your specifications.
OSSI-010-035 Sonic Wave Sensor XB – Product Description
The Ocean Sensor Systems OSSI-010-035 Sonic Wave Sensor XB is a high-resolution, wireless instrument designed to provide non-contact measurement of liquid surface height at sampling rates up to 32 Hz.
Measurement & Performance
| Measurement Range | Sub-millimeter to several hundred centimeters |
|---|---|
| Sampling Rate | Up to 32 Hz for detailed wave characterization |
| Measurement Principle | Ultrasonic travel-time measurement for non-contact operation |
| Calibration | Factory calibrated with specific output values at set distances |
| Synchronization | Capable of synchronized operation with up to 8 units for directional wave measurements |
Data Link & Communication
| Wireless Protocol | XBee protocol for wireless data transmission |
|---|---|
| Adapter Options |
|
| Data Streaming | Real-time data transmission to computer interface |
| Software Compatibility | Windows USB to Serial Converter driver with Staff & Sonic Product Interface Program |
Power & Battery
| Power Source | 2 C-size batteries (Alkaline, NiMH, or Lithium options) |
|---|---|
| Voltage Requirements |
Standard: 1.8-3.3V for Alkaline/NiMH Option -L: 4.2-10V for Lithium batteries |
| Battery Options |
|
| Power Management | Extended operation through configurable sleep modes and burst sampling |
Construction & Deployment
| Housing | Waterproof housing resistant to spray, rain, and sun exposure |
|---|---|
| Electronics | Solid-state electronics for enhanced durability |
| Mounting Requirements | Vertical orientation with sensor projecting downward |
| Clearance Requirements |
Minimum 0.25m clearance from obstructions Must be mounted at least 0.2m above highest expected water level |
| Mounting Accessories | Specialized mounting bracket available (OSSI-015-018-B) |
Control & Operation
| Interface Software | Staff & Sonic Product Interface Program for configuration |
|---|---|
| Version Compatibility |
V1.00: Known calibration bug with workaround V1.01: No known software issues |
| Sampling Modes | Continuous or burst sampling modes with low-power sleep between periods |
| Operation | Automatic operation upon power-up with configurable sampling intervals |
Maintenance
| Maintenance Level | Minimal maintenance requirements |
|---|---|
| Cleaning | External cleaning with soap, water, and soft cloth only |
| Internal Maintenance | No internal maintenance required due to sealed design |
| Battery Replacement | Via screw-top cap assembly with tape-assisted extraction |
Typical Applications
| Wave Monitoring | Intracoastal wave monitoring and wave tank research |
|---|---|
| Water Level Measurement | Tide and water level measurement in ponds, tanks, and pools |
| Directional Studies | Directional wave studies using multiple synchronized units |
| Research Applications | Coastal research, environmental monitoring, and laboratory fluid dynamics |
| Key Advantage | Wireless convenience with high-resolution measurement for above-water installation where real-time data access is required |
You May Also Be Interested In
Sonic Wave Sensor XB vs RV – Comparison Table
Key differences between the wired Sonic Wave Sensor RV and wireless Sonic Wave Sensor XB models
Product Overview
| Feature | Sonic Wave Sensor XB (OSSI-010-035) | Sonic Wave Sensor RV (OSSI-010-036) |
|---|---|---|
| Product Type | Wireless Sonic Sensor WIRELESS | Wired Sonic Sensor WIRED |
Connectivity & Communication
| Primary Communication | Wireless XBee protocol - no cables needed | Wired serial communication - RS232 or RS485 |
|---|---|---|
| Adapter Options | XBee USB/RS232 Adapters with up to 2-mile range | RS485/USB or RS232/USB Adapters - direct cable connection |
| Network Capability | Wireless mesh network - flexible deployment | Daisy-chain capability - up to 8 units on RS485 |
| Synchronization | Time-stamped data for up to 8 units | Time-stamped data for up to 8 units |
Power System
| Power Source | 2 C-cell batteries - Alkaline, NiMH, or Lithium options | 4-45V external power - wide voltage range |
|---|---|---|
| Battery Life | Months of operation with sleep modes | Continuous external power - no battery limitations |
| Power Options | Standard (1.8-3.3V) or Option -L (4.2-10V for Lithium) | 4-45V DC external supply |
Measurement Performance
| Sampling Rate | Up to 32 Hz | Up to 32 Hz |
|---|---|---|
| Measurement Range | Sub-millimeter to several hundred centimeters | Sub-millimeter to several hundred centimeters |
| Measurement Principle | Ultrasonic travel time | Ultrasonic travel time |
| Analog Output | Not available - wireless data only | 0-5V analog output (-1 & -2 models) |
Physical Design & Deployment
| Housing | Waterproof with solid-state electronics | Waterproof with solid-state electronics |
|---|---|---|
| Mounting | Vertical orientation, sensor projecting downward | Vertical orientation, sensor projecting downward |
| Clearance Requirements | 0.25m from objects, 0.2m above water | 0.25m from objects, 0.2m above water |
| Cable Length | No cables - wireless operation | 12 ft (-1 & -2) or 10m (-3) power/signal cable |
Configuration & Software
| Interface Software | Staff & Sonic Product Interface Program | User Interface Software (GUI) |
|---|---|---|
| Software Versions | V1.00 (calibration bug) and V1.01 (no issues) | No version-specific issues noted |
| Driver Requirement | Windows USB to Serial Converter | Windows USB to Serial Converter |
Maintenance & Applications
| Maintenance | Minimal - external cleaning with soap/water |
|---|
Company
Quick Links
Contact
+1 954-827-0641
sales@oceansensorsystems.com
Made In USA
Copyright © 2026 All Right Reserved OSSI
