SPIIDER DCCD CONTROLLER (Copy)

Price range: $469.00 through $769.00

SWAPPED IN A 6 SPEED STI TRANSMISSION? NEED A RACE TESTED DCCD CONTROLLER?

Motorsports Spiider DCCD Controller is Your Easy to Install Trusted Solution
Out of Box Performance, All Road Conditions Operation (No Map Required)
Intelligently Hands-Free, Race Ready Controller (No App required)

Please fill in all three drop-down lists to activate “Add to Cart”. If you do not require any option please choose “None”. All Prices in USD

DCCD PLUG

With STI Cluster Interface

SI Drive Control

Clear

SKU: SPD Category: Performance Products

DESCRIPTION

This motorsports grade product is designed for 6 speed transmissions equipped with DCCD mechanism. You will be able to adjust higher/lower aggressive setting compared to OEM, on the fly, with an easy dial (No App or Map Setup Required).

Additionally:

It includes everything required for DCCD Control independent of ECU/ABS either OEM or aftermarket
Advanced hardware and adaptive software design elevates DCCD high performance for motorsports
STi Cluster Interface option allows using pre MY08 STi Gauge cluster or DCCDPro LED Display
Switch to manual mode to adjustment between locked and unlocked levels using the control knob
If you are missing vehicle speed sensor (VSS) on the new transmission then checkout VssPlus

Operational Details:

The hardware and firmware are designed to work perfectly together to be as “driver transparent”. Our philosophy is that the less you need to adjust or monitor while driving the more you can concentrate on the road and your race.

Spiider Universal DCCD controller constantly monitors the attached sensors, updating the DCCD output based on how the car is behaving in reaction to driver inputs. It features adaptive firmware modes that it switches between on the fly. The system automatically switches between modes appropriate for “parking lot / highway cruise”, “aggressive cornering”, “aggressive straight line”, and “stuck in snow/mud” based on what information it receives from the sensors.

It monitors the output level as well as the speed at which the various sensors change. For example it can differentiate between slow gradual throttle application vs. rapid throttle acceleration and respond accordingly to change lock ratios to the center differential.

The controller features both auto and direct manual control of the DCCD. When the LED illuminated switch is pressed, this controller can manually control the output to DCCD from the control knob, OEM STi thumbwheel or SI-Drive DCCD+/- switch.

It can also be optioned with an interface to the STi DCCD display in ’07 and earlier STi clusters to display the output level of the DCCD signal. The display will rise as power levels increase. A compatible LED Display Bar (1.75” × 0.75”) option is also available with easy push-in holder into blank control slot (holder included with LED order).

If you need to tune the parameters to a very narrow range of operation for strict track conditions please add USB kit below:

Weight	N/A
Dimensions	N/A
DCCD PLUG	Full Pigtail, Housing with Pins, NONE
With STI Cluster Interface	Cluster Cables Only, Cluster Cables with Display, None
SI Drive Control	Support Only, With Plug, None